|
|||||
 |
Futaba 9-Channel Super |
||||
Product ID: |
A09CAPS | ||||
Manufacturer: |
Futaba | ||||
Channels: |
9 | ||||
Modulation: |
36 MHz FM | ||||
Servos: |
4 x S3001 | ||||
Receiver: |
R319 DPS 9 Channel PCM | ||||
Radio: |
Aircraft | ||||
TX Battery: |
NiCd | ||||
Model Memory: |
18 | ||||
Price: |
$799.00ea | ||||
Sale Price: |
$700.00ea | ||||
 Instruction Manual |
|||||
| Description: |
| 9-Channel Super 3-Servo W/- Nicad & Charger The next step up in 9-channel programming ease with Synthesized Transmitter & Receiver |
| Glider Mode: |
| In addition to the Basic offset trim, the 9C Super offers three other offsets (launch, thermal and speed), with camber that can be customized for each The four camber mixes can be set up on one screen and programmed to any of the variable dials. Besides setup ease, the glider mode boasts much more built-inflexibility A new G2F-C mix has been added to the G1FLP and G2FLP mixes. Airplane Mode The gyro system can be set up for 2-rate (up/down) or 3-rate (up/centre/down) with the GYA gyros, It can also be programmed to any switch for normal or AVCS modes. The Air Brake is now switch-selectable Both the Airplance and Glider Modes feature 7 programmable mixes: 5 Linear mixes and two 5-point curves. Heli Mode 5-point Throttle Curve and Pitch Curve now feature a delay that makes for a smoother transition from hover to idle-up and better control. The throttle hold and idle-up can be assigned to any switch that feels more comfortable for the pilot. Hi/Low Pitch can be utilized to adjust the curves on the high side and low side for each flight condition. Choose from six heli mixes: SWH1, SWH2, SR3, SN3, SWH4 and the new SWH3, along with two linear circuits and one 5-point curve. |
| 9C Computer Systems Feature: |
| Rotary Dial/4-button Programming 2 Proportional Slide Switch Controls Assignable switches All-electronic Trims w/Auto Memory 128 x 64 Dot Graphics LCD Servo Cycle & Bar Graph Display Expanded Chart/Curve Graphics Constant trim, voltage, name and timer display 8-character Model Naming Model Copy (Data Transfer available w/optional CAMpac use) Basic & Advanced Programming Menus Full Functionality Trainer System Sanyo Transmitter & Receiver NiCds Compatibility with all Futaba FM and 1024 PCM Receivers End Point Adjustment (EPA) on all channels Dual or Triple Rates (ele/ail/rud) Exponential (ele/ail/rud/thr) Throttle Cut & Idle-down Electronic Subtrim (all channels) Fail Safe (all channels; PCM models only) ATL Trim (on/off) Length-/Tension-adjustable Sticks Servo Reversing (all channels) Power and transmission LEDs |
| Airplanes: |
| 7 User-programmable Mixes, plus... Aileron Differential Airbrake (w/delayed Elevator)† Flaperon and Flap-Trim Elevator Flap Mix V-Tail & ELEVON 4 Programmable Snap Rolls Throttle-Needle Mixing Twin Elevators Option 2nd Channel Aileron Select |
| Sailplane: |
| 7 User-programmable Mixes, plus... Single/Dual Flap Servos Flap-Aileron Aileron-Flap Elevator-Flap Aileron Differential Butterfly Mixing Start (Launch) Preset Speed Preset |
| Running your thumb around the rim of the dial moves the cursor to highlight a menu, function and setting. Push the dial - and you select it.
Slider switches on both sides of the case can be used without taking your thumbs off the sticks or your eyes off the action sound cues confirm servo center. These fully proportional, sliders areassignabl to any switch/auxlary cennel function. A right-angle bend in the 9C's new-style trainer plug allows the rim around the RF module to protect it from port/plug damage. The extra-large LCD screen makes all graphics easier to read, from servo travel to the 5-point curves for governor mixing and throttle. |
| This data is subject to change without prior notice. |