|
|||||
 |
MPX Easyglider Pro Electric | ||||
Product ID: |
MPX214226 | ||||
Manufacturer: |
Multiplex | ||||
Wingspan: |
71" (180.3cm) | ||||
Length: |
43.7" (112.3cm) | ||||
Weight: |
28.5oz (810g) | ||||
Engine: |
Electric | ||||
Radio: |
4 Channel Not Included | ||||
Price: |
$79.00ea | ||||
| Features: |
| Elapor foam to resist damage White in color Wings: Two piece with fiberglass wing joiner Spinner: Elapor foam 2.2" (55mm) diameter Aileron Control: Dual servo "Full House" Control Surfaces: Elevator, Rudder and Ailerons |
| Includes: |
| One (1) Multiplex Easy Glider Pro with decal sheet, foam spinner, wing joiner, pushrods, hardware and illustrated instruction manual |
| Specifications |
| Wingspan: 71" (180.3cm) Length: 43.7" (112.3cm) Flying Weight: 28.5oz (810g) with standard power system Wing Loading: 6.5 oz sq ft (20 g sq/dm) with standard power system Wing Area: FAI approx. 226 sq in (41.6g/sq dm) Airfoil: Semi symmetrical CG (centre of gravity): 2.7" (70mm) from leading edge at wing root measured at fuselage side |
| Requires Not Included: |
| Radio System: 4-channel (min) with micro receiver Servos: Two (2) micro size for elevator & rudder Two(2) nano size for ailerons Servo Extensions: Two 16" (200mm) for aileron servos Y Harness: For aileron servos Battery: at least 2100mAh Battery Charger: LiPo compatible |
| If building as glider only the following items are required: |
| NiMh Receiver Battery (at least 1800mAh) Switch Harness with Charge Jack Launching Kit |
| Additional Info: |
| This model is NOT made from polystyrene foam. For this reason, it is not possible to use white glue or epoxy glue. Use only a medium CA glue and activator. Do not use CA glue designed for polystyrene foam. |
| This data is subject to change without prior notice. |